Articles about routing | UserComp.com

Configuring Route Traffic with WireGuard Interface Specific to OpenWRT (ASUS Router 22.03)

This article guides you through the process of configuring route traffic with WireGuard on an ASUS router running OpenWRT 22.03. We will focus on the wan port, br-lan share, local eth0.1, wlan0-1 virtual bridge network named camal, and provide a step-by-step guide for a successful setup.

Policy-Based Routing Via Two Networks on a Windows Machine

This article guides you through setting up Policy-Based Routing (PBR) on a Windows machine using two separate physical NICs to obtain two IP addresses, one routed via a VPN. The OS lacked knowledge...

Create Virtual Network Adapter for Windows: Route Traffic via Proxy

Learn how to create a Virtual Network Adapter in Windows for traffic routing via a proxy. This tutorial provides a step-by-step guide for efficient local proxy server load balancing across two physical network interfaces. Boost your network performance with this handy tip. Read more for detailed instructions.

Duplicate IPv6 SLAAC route on non-default table in AlmaLinux 9.5

This article discusses a problem with duplicate IPv6 SLAAC routes on a non-default table in AlmaLinux 9.5. It provides a solution to resolve this issue.

How to Route Traffic for Specific IP Addresses through a Virtual Network Interface on Ubuntu 22.04.5 LTS

Learn how to create a virtual network interface and route traffic for specific IP addresses in Ubuntu 22.04.5 LTS. This guide will help you modify netstat/rn results and improve your network management skills.

Routing WAN Traffic over OpenVPN Server IPsec Tunnel on Debian Server

This article guides you on how to route WAN traffic over an OpenVPN server IPsec tunnel on a Debian server. Using a Debian server as a WAN router, we will explain the reasons and the basic steps involved.

Routing WAN Traffic through IPSEC Tunnel on Debian Server

Learn how to route WAN traffic through an IPSEC tunnel on a Debian server. This guide will walk you through the process of configuring your Debian server as a WAN router, providing a secure and efficient solution for managing your network traffic. Improve your network security and optimize performance with our step-by-step instructions.

Routing WAN Traffic with IPSEC Tunnel on OpenVPN Server (Debian)

Learn how to route WAN traffic through an IPSEC tunnel on an OpenVPN server running on a Debian server. This guide will walk you through the steps to set up a WAN router using a Debian server.

Cisco NAT Routing Issue: Unable to Reach Web Server (Request Timed Out) - Cisco Packet Tracer

This article discusses a Cisco NAT routing issue that prevents users from reaching a web server. The issue is resolved using Cisco Packet Tracer. Keywords: Cisco NAT, Routing Issue, Web Server, Cisco Packet Tracer.

Using IP Route Open Software Subnet with 10.100.123.6255.255.255.0 Gateway

Learn how to use IP route open software subnet with the given IP address and gateway for optimal network performance. Maximize your network's potential with our comprehensive tech support guide.

Check Windows Routing Table Entry Used Given IP Address

Learn how to check the Windows routing table entry used for a specific IP address. This guide will help you manually simulate routing table rules selection.

Troubleshooting: Gamer Running Linux Server Not Using Correct Route

This article provides a solution for a gamer running a Linux server who is not using the correct route. The issue arises when setting up a proxy server for a game server on a different VPS and tunneling using SSH. We will use the 'firewall-cmd' command to add a masquerade to the 'public' zone permanently.

IPv6 DHCPD and RADVD Routing Issue: Statically Routed Devices Fail to Obtain IPv6 Addresses

This article discusses a common issue where devices like TVs and Chromecasts fail to obtain IPv6 addresses despite a well-configured statically routed network via MikroTik. We will explore potential solutions to this problem.

Custom Routing VPN Connection using Windows 11 for Always-On Remote Access

Learn how to set up a custom routing VPN connection using Windows 11 for always-on remote access to devices that don't support VPN client software installation.

Setting up Static Routing on Keenetic GIGA Router for Two Different Networks

Learn how to configure static routing on a Keenetic GIGA router for two different networks. Follow this step-by-step guide with diagrams and screenshots.

Accessing MacOS Host on Linux Container's VPN Network

Learn how to access a MacOS host running on a Linux container's VPN network. This article explains the process of routing VPN traffic and granting HTTP access.

Adding a New Route in macOS: Will it Affect Existing TCP/UDP Connections?

This tech support article discusses the impact of adding a new route in macOS on existing TCP and UDP connections. Learn whether this routing IP-level phenomenon affects established connections and how it works.

Avoiding Infinite Routing Loops with TUN2Socks Local Proxy

If you're experiencing an infinite routing loop while using TUN2Socks as a local proxy, this article explains the cause and provides solutions to avoid it.

Configuring WireGuard on MikroTik: A Beginner's Guide

Learn how to configure WireGuard, a versatile and easy-to-use VPN protocol, on MikroTik routers. This beginner's guide covers the basics and helps you bypass locks using AmnesiaWG.

Troubleshooting Cross-VLAN Connectivity: Ping Timeouts with SSH Not Working

This article discusses a common issue where devices on different VLANs cannot communicate via SSH or other protocols, but establishing a connection is possible after initiating a ping. The article explores possible causes and solutions.

Configuring WireGuard VPN Routes for Network Application on Binded Network Interface

Learn how to configure WireGuard VPN routes for network applications on binded network interfaces. This setup ensures proper traffic routing, even when using an SSH connection to a VPS.

Routing Issues with Dual WiFi Hotspots: One Wireguard VPN, One Direct - Tech Support Site

Having trouble with routing when using dual WiFi hotspots, one with Wireguard VPN and one direct? Learn how to troubleshoot and resolve common issues in this tech support article. Maximize your networking potential with our expert guidance.

Grouping Routes with ServeMux in HTTP Package

Learn how to create a small API using ServeMux in the HTTP package, and group routes together with a prefix in Go. Follow our step-by-step guide and sample code to get started.

Debugging IPv6 Routing with Multiple Interfaces on a Linux Server with IPSec (Libreswan) Installed

Having trouble getting IPv6 routing to work on your Linux server with two NICs and Libreswan IPSec installed? This article will provide tips and insights on how to debug and resolve the issue, ensuring your VPN works seamlessly across both networks.

UniFi Dream Machine Special Edition (UDMSE): IPTables NAT PREROUTING Not Working for Subnet

Experiencing issues with IPTables NAT PREROUTING on your UniFi Dream Machine Special Edition (UDMSE) for a specific subnet? Learn about possible solutions and workarounds in this tech support article. Read more to find out.

How to Route LAN Users on CentOS 7 to Use IPPBX through eth1

In this tech support article, we will guide you on how to route LAN users with an IP address range of 10.70.100.0/24 to use the IPPBX through eth1 on CentOS 7. Follow the step-by-step instructions to configure your network settings and enable seamless communication.

IPv4 vs IPv6 Source Address Tunnel with Wireguard: Separate Routing and IP Checking

Learn how to set up a Wireguard tunnel for separate IPv4 and IPv6 routing, and how it affects IP checking on a website tunnel. Disabling NATv4 can lead to blocked traffic.

Routing Traffic: Static IP vs. DHCP on Ubuntu 22.04

Learn how to configure static and dynamic routing on Ubuntu 22.04 for a wired (eno1) and wireless (wls4) interface.

Linux Server 2: No Internet Access - Troubleshooting with Linux Gateway

This article provides a step-by-step guide to troubleshooting network routing issues between Linux Server 2 and the internet, using Linux Gateway as an intermediary.

AlmaLinux 9.4 Multi-NIC Routing Issue with 'use()' function including redhat CentOS

Users of AlmaLinux 9.4 are encountering issues with multi-NIC routing when implementing the 'use()' function, which is also present in CentOS. This article aims to provide a solution for this problem.

Setting up Routings and Subnets for a Novlan Network: Dividing a Physical Network with Different Masks

Learn how to set up routings and subnets for a Novlan network, where one physical network (172.16.28.0) needs to be divided using different masks, and the gateway (172.16.28.1) requires subnet access.

Unable to Connect: ISP Assigned IP Address Changes Prevent WAN-LAN Connection

Users encounter issues connecting their WAN IP to a local network after their ISP assigns a new IP address. This article explores possible solutions to resolve the connection problem.

Setting up Routing on a Windows Machine with One Ethernet Card and Access to Two Networks (Internet and Private)

Learn how to set up routing on a Windows machine with one Ethernet card and access to two networks - the internet and a private network.

4G Router: Static Routing Without Gateway

Learn how to configure static routing on a 4G router without using a gateway. This article provides instructions for setting up routing between two Ethernet ports on a single server machine.

Configuring Source NAT for Multi-Interface Systems: Specify Different Source Addresses

In this tech support article, we will guide you through the process of configuring Source NAT for a system with multiple interfaces, each having different source addresses. We will explain how to set up masquerading for public and private IP addresses.

Routing AWS EC2 Instance in South Africa: Customer Concerns about Reaching Instance Outside Africa

A customer based in South Africa is experiencing issues with their EC2 instance being routed outside Africa, leading to latency and increased costs. In this article, we discuss potential solutions to ensure optimal routing for your AWS EC2 instances.

Troubleshooting Static Route Issues in Windows

Learn how to diagnose and resolve static route issues in Windows operating systems. This article covers common causes and solutions.

Understanding User Outer without Gateway: Sending Packets Directly

Users may be confused about the role of gateways in sending packets between networks. This article explains the concept of user outer without gateway and how it allows direct packet sending.

Understanding IP Route Next Hop Object Management Utility: Purpose and Relationship with IPRoute

This article explains the purpose of the IP Route Next Hop object management utility and its relationship with the IPRoute command. It covers the standard way of using these tools within the industry and their impact on packet routing.

Cloud Management: Routed Devices Connected to Router EVE-NG - Troubleshooting Ping Issues

Experiencing ping issues with devices connected to an EVE-NG router in a cloud environment? Learn how to troubleshoot and resolve the problem.

Resolving Asymmetric Routing Issue in a Network with PfSense Router

Learn how to troubleshoot and resolve asymmetric routing issues in a network with PfSense router. This article covers a network with a PfSense router tagged for network 10.1.0.0/23 and VLAN 10.1.40.0/24, and a wireless computer connected to network 10.1.0.0.

Routing Traffic between Mobile Hotspot (swlan0) and VPN (tun0) on Rooted Android Device

This article explains how to route traffic between a Mobile Hotspot (swlan0) and a VPN (tun0) on a rooted Android device using IPTables.

Propagating Windows Routing for a Specific IP Address on Windows 11 via VPN

Learn how to set up routing for a specific IP address on a Windows 11 machine using a VPN connection.

Interconnecting Two Discrete NICs: Failed Routing Table Manipulation

This article provides a solution to interconnect two discrete Network Interface Cards (NICs) by manipulating the routing table. However, users experiencing issues may find that their attempts have failed. This article explains the potential causes and offers troubleshooting steps.

Routing Traffic Between Different Table/Backend Interfaces: wlan0 and wg0

Learn how to configure and route traffic between two manually configured interfaces, wlan0 and wg0, with different table/backend configurations.

LAN Network: Machine with Wrong Mask Causes Communication Issue after Cisco 2520 Upgrade

After upgrading a Cisco 2520 switch, a machine with an incorrect IP mask is causing communication issues. Previously, the same switch was connected to another switch via a trunk, allowing VLAN routing. Learn how to resolve this problem.

Understanding IP Routing Table 220 with StrongSwan on Linux

This article explains how to interpret the IP routing table 220 on a Linux system using StrongSwan. The article provides examples and instructions for understanding the protocol statistics and source IP addresses listed in the table.

IPv6 Routes Mysteriously Disappearing in Linux: Troubleshooting Complex WireGuard Setups

Learn how to diagnose and fix IPv6 routes that disappear in Linux systems with complex WireGuard setups. This article covers common issues and provides solutions for automated network device management and forwarding settings.

Understanding Packet Forwarding vs Local Delivery in Network Routing

When a packet is received by the Linux kernel, it goes through the pre-routing chain. The routing decision is made whether to forward the packet somewhere else or deliver it locally. In this article, we'll discuss the difference between packet forwarding and local delivery in network routing.

Routing Windows 10 Traffic via MacBook (Mid 2015) as an Internet Router

Learn how to configure a MacBook Pro (Mid 2015) running macOS HighSierra as an Internet router for a Windows 10 laptop via Ethernet.

Articles about routing | UserComp.com

Other interesting tags