Configuring Xiaomi AC1200 Repeater: Browser-Based Custom SSID Setup in Access Point Mode

Prerequisites

Before we begin, ensure the following:

• Your Xiaomi AC1200 Repeater is connected to the power source and the internet.
• Your computer or mobile device is connected to the Xiaomi AC1200 Repeater's Wi-Fi network.

Accessing the Web Interface

To access the Xiaomi AC1200 Repeater's web interface, follow these steps:

1. Open a web browser on your computer or mobile device.
2. Enter the IP address of the Xiaomi AC1200 Repeater in the address bar. The default IP address is 192.168.31.1.
3. Press Enter. You will be prompted to enter the username and password. The default credentials are 'admin' for both.

Configuring Custom SSID in Access Point Mode

Once you have logged in, follow these steps to configure a custom SSID in Access Point mode:

1. Click on the 'Wireless' tab in the left-hand menu.
2. Under the 'Wireless Settings' section, locate the 'Wireless Repeater' tab and click on it.
3. Set the 'Wireless Repeater Mode' to 'Access Point'.
4. Under the 'Access Point Settings' section, enter your desired SSID in the 'SSID' field.
5. Set the 'WPA-PSK' encryption to 'WPA2-PSK' and enter a strong password in the 'Pre-Shared Key' field.
6. Click 'Save' to apply the changes.

In this article, we have covered how to configure the Xiaomi AC1200 Repeater using a web browser to set up a custom SSID in Access Point mode. We have also provided the necessary prerequisites and steps to access the web interface and make the desired changes. By following these steps, you can create a separate Wi-Fi network with a custom SSID and secure it with a strong password.