Articles about nft | UserComp.com
Avoiding Nftables Configuration Mistakes: Allowing Outgoing SSH Connections
Learn how to avoid a common mistake when configuring nftables to allow outgoing SSH connections to a backup server. Make sure to follow best practices and test your rules before implementation. #nftables #Linux #networksecurity
Read More
Configuring NFTv6 Duplex Prefix Rewriting in OpenWRT 24.10 for Multiple Internet Providers
In this article, we'll show you how to extend a 3GPP WAN interface/64 prefix via PDN in OpenWRT 24.10 using nftables v1.1.1 and NPTv6. This will enable you to configure multiple Internet providers and optimize your network for better performance. Read more to learn how to implement this technology on your OpenWRT system.
Read More
Troubleshooting NFTables: Not Dropping Packets
Having issues with NFTables not dropping packets? Learn about routing chain implementation for a simpler rule to drop packets at layer 3. This tech support article provides guidance on resolving NFTables packet filtering problems.
Read More
Match Traffic Destination MAC using nftables for Remote IPv6 LAN Access with Dynamic IP
This article explains how to match traffic destination MAC using nftables for remote IPv6 LAN access with dynamic IP. If you want to use IPv6 remotely to access a machine with a non-fixed IP address, this guide will help you set up nftables rules to match traffic using MAC addresses instead. Learn how to configure your network for secure and seamless remote access.
Read More
Ubuntu 22.04: Troubleshooting EBTABLES (NFT-based) Frame Dropping Rules with No Effect
Explore the new ebtables application in Ubuntu 22.04, based on NFT. Learn how to troubleshoot frame dropping rules that have no effect, following the EBTABLES (8) manual description. Improve your system's security with up-to-date knowledge.
Read More
Couldn't Manage firewall setup on Debian 12 using nft, ufw worked intended
In this tech support article, we will guide you through setting up a firewall on Debian 12 using nftables and ufw. While nftables is the new firewall management system, ufw is a user-friendly frontend for iptables and easier to use for beginners. In this article, we will cover how to install, configure, and manage firewalls using both nftables and ufw.
Read More
Troubleshooting NFTables: Unable to Catch Packets Already Seen on Dell S4810 Switch
This article discusses a common issue with NFTables on a Dell S4810 switch where packets are not being caught even though they have already been seen. Learn how to troubleshoot and resolve this issue.
Read More
Setting up Nginx Reverse Proxy with NFTables and Encrypted HTTPS on CGNAT
Learn how to configure Nginx as a reverse proxy with NFTables for traffic routing and encrypted HTTPS on a CGNAT network. This tutorial covers setting up a Linode server and optimizes for SEO.
Read More
NFTables: Using Ethereum Addresses for Forward Chain Filtering
Learn how to use Ethereum addresses for filtering traffic in NFTables, a next-generation firewall technology.
Read More
Setting Up Full Cone NAT with nftables on Debian for miniupnpd
Learn how to set up Full Cone NAT with nftables on Debian for miniupnpd. This tutorial covers the necessary steps to configure your Debian system for Full Cone NAT, using nftables and miniupnpd.
Read More
Understanding the Default Verdict with nftables Rule: A Comprehensive Guide
This article provides an in-depth explanation of the default verdict in nftables rules. Learn how to configure and manage the default verdict to enhance network security and performance. A must-read for Linux system administrators and network engineers. Read more for a comprehensive guide.
Read More
Adding Regular Chain NFTables: 'Operation Not Supported''
This article explains how to add regular chain NFTables with an unsupported operation message.
Read More
Nftables Configuration for NAT using IPsec Tunnel on Raspberry Pi
Learn how to configure Nftables for Network Address Translation (NAT) with an IPsec tunnel on a Raspberry Pi device. This tutorial covers setting up two network interfaces (eth0 and eth1), establishing an IPsec tunnel using StrongSwan, and mapping the local network (10.130.X.0/24) remotely.
Read More
Printing Message in pytest using conftest.py
In this article, we will discuss how to print messages directly within the conftest.py file in pytest.
Read More
Can iproute2-tc or nftables change the SA/TA in 802.11 frame?
Learn how to modify the Source Address (SA) and Transmitter Address (TA) in 802.11 frames using iproute2-tc or nftables. Explore the capabilities and techniques for altering these addresses to enhance network functionality.
Read More
Redirect Local Requests to IP to Other IP (Linux - e.g. Debian >= 10)
Learn how to redirect local requests to one IP address to another IP address on Linux using nftables. This article provides step-by-step instructions for Debian 10 and newer versions.
Read More
Using nftables to Drop SNMP Packets with a Specific Community String
Learn how to use nftables to drop SNMP packets that contain a specific community string. Enhance your network security by filtering unwanted SNMP traffic.
Read More