It seems like the Kyocera P3150DN printers are experiencing USB connection flapping, where they print seemingly every 15 minutes even with 48 users connected. This issue can be troublesome, but it can be resolved by following some steps.
First, let's understand what might be causing this issue. The USB connection flapping can be due to several reasons such as driver issues, hardware problems, or network interference.
To troubleshoot this issue, you can try the following steps:
-
Update Printer Drivers: Ensure that the printer drivers are up-to-date. You can download the latest drivers from the Kyocera official website.
-
Check USB Cables: Inspect the USB cables connecting the printer to the computer. If there are any damaged cables, replace them.
-
Check Printer Settings: Go to the printer settings and check if the printer is set to print automatically when a job is received. If it is, change it to manual print mode.
-
Check Network Interference: If the printer is connected to a network, there might be network interference causing the issue. Try disconnecting other devices from the network and see if the problem persists.
-
Check Printer Hardware: If the issue still persists, there might be a hardware problem with the printer. Contact Kyocera support for further assistance.
Here is a summary of the steps mentioned above:
- Update Printer Drivers
- Check USB Cables
- Check Printer Settings
- Check Network Interference
- Check Printer Hardware
References: