Introduction
Recently, there have been issues with installing Windows 11 on an HP ProLiant Gen 9 server with an SSD where the SSD is not being detected during installation. This article aims to provide a detailed guide on how to resolve this issue and successfully install Windows 11 on an HP ProLiant Gen 9 server with an SSD.
Prerequisites
Ensure that you have the following:
- HP ProLiant Gen 9 server
- SSD drive
- Windows 11 installation media
Checking BIOS Settings
The first step is to check the BIOS settings to ensure that the SSD drive is detected by the system. Here are the steps:
-
Reboot the server and press F9 to enter the system BIOS settings
-
Navigate to the System Configuration Utility and then select Device Configuration
-
Check that the SSD drive is listed and enabled
-
Save and exit the BIOS settings
Checking the SSD Drive
The next step is to check that the SSD drive is properly connected to the server and healthy. Here are the steps:
-
Shut down the server and open the server case
-
Check that the SSD drive is properly connected to the server
-
Power on the server and check the system logs for any errors related to the SSD drive
Updating the Firmware
If the SSD drive is detected but not being recognized during the Windows 11 installation, it is possible that an updated firmware or driver is required. Here are the steps:
-
Navigate to the HP website and download the latest firmware or driver for the SSD drive
-
Extract the downloaded file and copy it to a USB drive
-
Reboot the server and press F10 to enter the system BIOS settings
-
Navigate to the System Configuration Utility and then select System Options
-
Select the USB drive as the boot device and boot from the USB drive
-
Follow the prompts to install the updated firmware or driver
Installing Windows 11
If the SSD drive is still not being recognized during the Windows 11 installation, it is possible that the Windows 11 installation media is not compatible with the HP ProLiant Gen 9 server. Here are the steps:
-
Download the Windows 11 Media Creation Tool from the Microsoft website
-
Run the MediaCreation ```