Setting Linux Permissions on Synology Drive Connected to Windows Network Drive using SCP over MobaXTerm
In today's world, where data security and privacy are of utmost importance, it is crucial to manage file permissions correctly. This article focuses on setting Linux permissions on a Synology drive connected to a Windows network drive using SCP (Secure Copy) over MobaXTerm.
Prerequisites
- A Windows computer with MobaXTerm installed.
- The Windows computer should be connected to a Synology server over a Windows network drive.
Configuring MobaXTerm
To use SCP over MobaXTerm, you need to set up a new session with the following steps:
- Open MobaXTerm and click on the "Session" button.
- Select "SSH" as the session type and enter the IP address of your Synology server.
- Check the "Use private key" box and browse to the location of your private key file.
- Under "Advanced SSH settings," check the "Use SCP to transfer files" box.
- Click "OK" to create the new session.
Setting Linux Permissions
Once you have set up the MobaXTerm session, you can access the Synology drive as a Linux file system. You can navigate to the drive using the following command:
cd /mnt/your_synology_drive_nameTo set permissions, you can use the chmod command. For example, to set read, write, and execute permissions for the owner, group, and others on a file, you can use the following command:
chmod 777 your_file_nameHere, 777 represents read, write, and execute permissions for the owner, group, and others. You can replace 777 with different permission combinations as per your requirements.
Changing File Ownership
Apart from setting permissions, you can change the file ownership using the chown command. For example, to change the ownership of a file to a specific user and group, you can use the following command:
chown user_name:group_name your_file_name- MobaXTerm can be used to set Linux permissions on a Synology drive connected to a Windows network drive using SCP.
- To set up a new session in MobaXTerm, you need to enter the IP address of your Synology server and the path to your private key file.
- You can set file permissions using the chmod command and change the file ownership using the chown command.
References
This article is intended to provide a general overview of the process of setting Linux permissions on a Synology drive connected to a Windows network drive using SCP over MobaXTerm. It is not intended to be a comprehensive guide, and the commands and settings provided may vary based on your specific setup and requirements.