Wiping a NAS Shard Disk using iSCSI

Wiping a NAS Hard Disk using iSCSI: A Complete Guide

When it comes to retiring an old NAS (Network Attached Storage) system, completely wiping the hard disks before throwing them away is a crucial step. This article will focus on how to wipe a NAS hard disk using the iSCSI protocol. We will cover key concepts, provide detailed explanations, and use subtitles to guide the reader through the process.

What is iSCSI?

The Internet Small Computer System Interface (iSCSI) is a protocol used to transfer data over a network using the SCSI command set. This protocol enables the use of storage devices, such as hard disks, as if they were directly attached to the system.

Preparing for the Wipe

Before starting the wipe process, make sure to back up any important data from the NAS hard disks. Additionally, ensure that the system will not be used during the wipe process.

Accessing the NAS Hard Disk using iSCSI

To access the NAS hard disk using iSCSI, follow these steps:

1. Install an iSCSI initiator on the system where you want to wipe the NAS hard disk. For example, on Windows, you can use the built-in iSCSI initiator.
2. Connect to the NAS target by specifying the IP address and the iSCSI name.
3. Log in to the target using the necessary credentials.

Wiping the NAS Hard Disk

To wipe the NAS hard disk, you can use a specialized tool such as Acronis Drive Cleanser. This tool provides a job specifically designed for wiping hard disks, ensuring that all data is securely erased.

Code Example: Acronis Drive Cleanser Command Line Interface

To use Acronis Drive Cleanser from the command line interface, you can use the following command:

Where:

• cleanup-drive specifies the drive letter of the NAS hard disk to be wiped.
• overwrite specifies the number of overwriting passes (3 is the recommended value for maximum security).
• force forces the clean up without any prompts or confirmations.

To wipe a NAS hard disk using iSCSI, follow these steps:

1. Install an iSCSI initiator on the system.
2. Connect to the NAS target and log in.
3. Use a specialized tool, such as Acronis Drive Cleanser, to wipe the hard disk securely.

References

• Microsoft Documentation: iSCSI Target Server
• Acronis Drive Cleanser Documentation