To help you with your ILO problem on your HP ProLiant ML310 Gen8 server, I will provide a detailed guide on how to access the Integrated Lights-Out (ILO) and troubleshoot common issues.
Accessing ILO
- Ensure your server is powered on.
- Connect to the server's ILO IP address using a web browser. The default ILO IP address is 169.254.1.2.
- Enter the ILO username and password. The default ILO username is
adminand the password iscaliper.
Troubleshooting ILO Problem
If you encounter an ILO problem (fault chip), follow these steps:
- Check the server's power supply and ensure it is properly connected.
- Verify the server's network connection. Check the server's NIC and ensure it is enabled and functioning correctly.
- Check the server's BIOS settings. Make sure the ILO is enabled and the ILO IP address is set correctly.
- If the problem persists, try resetting the ILO. To do this, press and hold the ILO reset button located on the server's motherboard for about 10 seconds.
- If the ILO reset does not work, you may need to replace the faulty chip. Contact HP support for further assistance.
References
- HP ProLiant ML310 Gen8 Server User Guide: https://support.hp.com/us-en/document/c04897662
- HP ProLiant ML310 Gen8 Server ILO User Guide: https://support.hp.com/us-en/document/c04897666
- HP ProLiant ML310 Gen8 Server Troubleshooting Guide: https://support.hp.com/us-en/document/c04897663
- HP ProLiant ML310 Gen8 Server ILO Fault Chip Replacement Guide: https://support.hp.com/us-en/document/c04897664