How to Recover Mobius 5 Bay RAID Array with 10TB Drives in RAID10 Configuration

Understanding RAID10

RAID10, also known as RAID 1+0, is a popular RAID configuration that combines data striping and parity for improved data redundancy and performance. In a RAID10 array, data is striped across multiple disks, and parity information is distributed across all disks. This configuration provides both data redundancy and improved performance.

Prerequisites

Before attempting to recover a Mobius5Bay RAID10 array, ensure that:

• All drives are connected and powered on.
• The Mobius5Bay controller is properly installed and configured.
• The RAID array is detected by the controller.

Recovering a RAID10 Array

If the RAID10 array fails to start due to a power breaker device issue, follow these steps:

Step 1: Access the Mobius5Bay Controller

Connect to the Mobius5Bay controller using a web browser or the dedicated software. The default IP address is usually 192.168.1.2.

Step 2: Check the Array Status

Once logged in, check the status of the RAID array. If the array is not detected, ensure that all drives are connected and powered on. If the array is detected but not started, proceed to the next step.

Step 3: Rebuild the Array

To rebuild the RAID10 array, follow these steps:

1. Navigate to the "Array" tab and select the RAID10 array.
2. Click the "Rebuild" button.
3. Confirm the rebuild by clicking "OK" in the pop-up window.

The rebuild process may take several hours, depending on the number and size of the drives in the array.

Step 4: Monitor the Array Rebuild

Monitor the array rebuild process by checking the "Array" tab regularly. Once the rebuild is complete, the array should be online and accessible.

Summary

In this article, we discussed how to recover a Mobius5Bay RAID10 array using 10TB drives when the power breaker device fails. By following the steps outlined above, you should be able to successfully rebuild the array and restore access to your data.