Connecting a Kali Linux PC, Actgateway Devices, and a Mercusys MS10810/100 Unmanaged Switch
This article discusses the process of connecting a Kali Linux PC, Actgateway devices, and a Mercusys MS10810/100 unmanaged switch. The focus is on setting up a network environment for penetration testing, security assessments, or any other networking purposes.
Background
Mercusys MS10810/100 is a popular unmanaged switch, providing a simple, cost-effective solution for expanding a network. It comes with 108 Gigabit ports, allowing multiple devices to connect and communicate over a local network. Actgateway devices can be various network equipment, such as routers or modems, providing internet connectivity. This article explains how to configure a Kali Linux PC and connect it to these devices using a Mercusys MS10810/100 switch, even if the local PC only receives an IP address starting with 10.
Prerequisites
- A Kali Linux PC (physical or virtual machine)
- A Mercusys MS10810/100 unmanaged switch
- Actgateway devices (routers, modems), with at least one LAN port (example: ACT Fiber Routers)
- Straight-through Ethernet cables
Setting up the Mercusys MS10810/100 Switch
The Mercusys MS10810/100 switch does not require any configuration since it is an unmanaged switch. Just plug it into a power source, and it will automatically start functioning as a network hub.
Connecting Devices to the Switch
Using straight-through Ethernet cables, connect one LAN port from the Actgateway device to any port on the Mercusys switch. Connect another Ethernet cable from the Kali Linux PC to another port on the Mercusys switch.