Troubleshooting WP Site Issues with MikroTik RouterOS: Configuring Virtual Wireless Interfaces
If you are experiencing issues with your WordPress site and have MikroTik RouterOS configured with virtual wireless interfaces added to two physical ones, you may have encountered the "WPS Accept" button appearing on the master interface.
Understanding MikroTik RouterOS and Virtual Wireless Interfaces
MikroTik RouterOS is a versatile and feature-rich networking platform that allows for the configuration of multiple interfaces and services. Virtual wireless interfaces allow for the creation of multiple virtual interfaces on top of a single physical wireless interface. This can provide increased flexibility, but can also lead to issues if not configured correctly.
The Issue with MikroTik cAP and Virtual Wireless Interfaces
When configuring MikroTik cAP devices with virtual wireless interfaces added to two physical interfaces, the "WPS Accept" button may appear on the master interface. This can cause confusion and lead to issues with the proper functioning of the device.
Solution: Proper Configuration of Virtual Wireless Interfaces
To resolve the issue, it is important to properly configure the virtual wireless interfaces. The first step is to ensure that the virtual wireless interfaces are properly created and assigned to the correct physical interfaces.
<[/code> /interface wireless
set [find name=wlan1] mode=ap-wds ssid=MyNetwork
/interface wireless
add name=virtual1 master-interface=wlan1 mode=ap-wds ssid=Virtual1
/interface wireless
add name=virtual2 master-interface=wlan2 mode=ap-wds ssid=Virtual2
Next, it is important to ensure that the virtual wireless interfaces are properly connected. This can be done by specifying the wireless interface connected to the wireless network.
<[code> /interface wireless
set [find name=wlan1] disabled=no
/interface wireless
set [find name=wlan2] disabled=no
/interface wireless
set [find name=virtual1] connected-mac-address=mac-address-of-wlan1-client
/interface wireless
set [find name=virtual2] connected-mac-address=mac-address-of-wlan2-client
By following these steps, you can properly configure your virtual wireless interfaces and resolve the issue of the "WPS Accept" button appearing on the master interface. This will ensure that your MikroTik RouterOS and WordPress site function properly.
- Issue: "WPS Accept" button appearing on MikroTik RouterOS master interface
- Cause: Improper configuration of virtual wireless interfaces added to two physical interfaces
- Solution: Properly configure virtual wireless interfaces and specify connected wireless interface
References
- MikroTik, "MikroTik RouterOS," https://mikrotik.com/routeros
- MikroTik, "Virtual APs," https://wiki.mikrotik.com/wiki/Virtual_APs
- MikroTik, "Virtual Wireless Interfaces," https://forum.mikrotik.com/viewtopic.php?t=92493