Win11WinServer Local Network: Randomly Closing Ping Windows
In a local network with Windows 11 Pro and Windows Server 2019 machines, users may encounter an issue where ping windows close randomly. This article will cover the possible causes and solutions for this problem, focusing on key concepts and using subtitles, paragraphs, and code blocks as needed.
Context
Ping is a command-line utility used to test network connectivity by sending Internet Control Message Protocol (ICMP) echo requests to a specified host. When the host receives the request, it sends an echo reply back to the source. The ping command displays the round-trip time (in milliseconds) taken to receive the reply.
In a local network, ping is often used to troubleshoot connectivity issues between devices. However, if the ping windows close randomly, it can be challenging to diagnose and resolve the problem.
Possible Causes
There are several possible causes for randomly closing ping windows in a local network:
- Firewall settings
- Network adapter settings
- Power settings
- Software conflicts
Solutions
Firewall Settings
Firewalls can block ICMP traffic and cause ping windows to close randomly. To check if this is the case, temporarily disable the firewall on both machines and try pinging again.
If ping works with the firewall disabled, you can add a rule to allow ICMP traffic:
- Open the Windows Defender Firewall with Advanced Security control panel.
- Click on "Inbound Rules" and then "New Rule."
- Select "Custom" and then "Next."
- Select "ICMPv4" and then "Next."
- Select "Allow the connection" and then "Next."
- Select the network location types you want to apply the rule to and then "Next."
- Give the rule a name and then "Finish."
Network Adapter Settings
Network adapter settings can also cause ping windows to close randomly. To check if this is the case, open the network adapter properties on both machines and ensure that the "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" properties are set to obtain IP addresses and DNS server addresses automatically.
Power Settings
Power settings can cause network adapters to turn off to save power, causing ping windows to close randomly. To check if this is the case, open the Power Options on both machines and ensure that the network adapter is set to "Maximum Performance" or "Always On."
Software Conflicts
Software conflicts can also cause ping windows to close randomly. To check if this is the case, close all other applications on both machines and try pinging again.
Code Blocks
Here are some code blocks that demonstrate how to use the ping command:
C:> ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1msTo ping a host by name, use the following command:
C:> ping myhost.mydomain.com
Pinging myhost.mydomain.com [192.168.1.1] with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Reply from 192.168.1.1: bytes=32 time=1ms TTL=128
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1msIn this article, we covered the possible causes and solutions for randomly closing ping windows in a local network with Windows 11 Pro and Windows Server 2019 machines. We discussed firewall settings, network adapter settings, power settings, and software conflicts as possible causes and provided solutions for each.