SSH Specific: Setting up WiFi or Ethernet Connection on Windows 10

SSH Specific: Setting WiFi Ethernet Connection on Windows 10

In this article, we will discuss how to set up a WiFi ethernet connection on a Windows 10 PC to connect to an embedding device with an IP address of 172.1... using SSH (Secure Shell). We will cover the key concepts and provide detailed instructions on how to accomplish this task.

Prerequisites

Before we begin, make sure you have the following:

• A Windows 10 PC with WiFi and Ethernet capabilities
• An embedding device with an IP address of 172.1...
• An SSH client installed on your Windows 10 PC (such as PuTTY or OpenSSH Client)

Setting up WiFi Connection

To set up a WiFi connection on your Windows 10 PC, follow these steps:

1. Click on the WiFi icon in the system tray and select the network you want to connect to.
2. Enter the network password, if required, and click on the Connect button.
3. Once connected, you should see the WiFi icon in the system tray change to indicate a successful connection.

Setting up Ethernet Connection

To set up an Ethernet connection on your Windows 10 PC, follow these steps:

1. Connect the Ethernet cable to your PC and the embedding device.
2. Right-click on the Start button and select Network Connections.
3. Right-click on the Ethernet connection and select Properties.
4. Double-click on Internet Protocol Version 4 (TCP/IPv4) to open its properties.
5. Select the Use the following IP address option and enter the IP address, subnet mask, and default gateway for the embedding device.
6. Select the Use the following DNS server addresses option and enter the DNS server address for the embedding device.
7. Click on the OK button to save the changes.

Setting up SSH Connection

To set up an SSH connection on your Windows 10 PC, follow these steps:

1. Open your SSH client and enter the IP address of the embedding device.
2. Enter your username and password for the embedding device and click on the Connect button.
3. Once connected, you should see a terminal window with a command prompt for the embedding device.

Testing the Connection

To test the connection, you can try running a command on the embedding device using the SSH terminal window. For example, you can try running the ifconfig command to display the network configuration of the embedding device.

In this article, we have discussed how to set up a WiFi ethernet connection on a Windows 10 PC to connect to an embedding device with an IP address of 172.1... using SSH. We have covered the key concepts and provided detailed instructions on how to accomplish this task. By following the steps outlined in this article, you should be able to set up a stable and secure connection to your embedding device.

References

• Windows WiFi
• Windows Ethernet
• OpenSSH Client for Windows