EPSON WorkForce PROWF-6590 Printer: Unable to Make it Work on Fedora 40 Workstation
In this article, we will discuss the steps to configure an EPSON WorkForce PROWF-6590 printer on a Fedora 40 Workstation with GNOME 46.4. Although the printer claims to support network printing, many users have reported difficulties in making it work.
Prerequisites
Before we begin, make sure you have the following:
- EPSON WorkForce PROWF-6590 printer
- Fedora 40 Workstation with GNOME 46.4
- A stable network connection between the printer and the workstation
Step 1: Install the Printer Driver
The first step is to install the printer driver. Open a terminal window and run the following command:
sudo dnf install epson-inkjet-printer-escpr
This command installs the Epson Inkjet Printer Driver (ESC/P-R) package, which includes the necessary drivers for the EPSON WorkForce PROWF-6590 printer.
Step 2: Add the Printer
Once the driver is installed, you can add the printer. Go to Settings > Printers and click on the Add Printer button. The system will search for available printers. If the printer is not detected automatically, click on the Add Manually button.
Enter the printer's name, description, and location. Select the EPSON WorkForce PROWF-6590 from the list of available printers. If the printer is not listed, select the Generic printer and enter the printer's URI manually.
The URI for a network printer is typically in the format ipp://printer.local/ or socket://printer.local:631.
Step 3: Configure the Printer
After adding the printer, you can configure it. Go to Settings > Printers and select the newly added printer. Click on the Properties button and select the Printer Options tab.
Set the paper size, print quality, and other options as needed. Click on the Apply button to save the changes.
Step 4: Test the Printer
Finally, you can test the printer. Go to Settings > Printers and select the newly added printer. Click on the Print Test Page button to print a test page.
Troubleshooting
If the printer still does not work, try the following:
- Restart the printer and the workstation
- Check the network connection between the printer and the workstation
- Make sure the printer is turned on and in a ready state
- Check the printer's configuration settings and make sure they are correct
- Try printing from a different application
References
- Epson Inkjet Printer Driver - Fedora Project Wiki
- EPSON WorkForce PROWF-6590 Printer Driver - Epson America
- Printing - Fedora Project Wiki
This article covers the steps to configure an EPSON WorkForce PROWF-6590 printer on a Fedora 40 Workstation with GNOME 46.4. By following the steps outlined in this article, you should be able to make the printer work on your network. If you encounter any issues, refer to the troubleshooting section or the references for further assistance.