Removing 2EFIsystem File in PopOS for Virtual Mac and Hackintosh

Removing the 2EFI System File in Pop OS Virtual Mac Hackintosh

If you have installed Pop OS and created a virtual Mac system using Hackintosh, you may want to completely remove Linux Pop OS and get rid of the 2EFI files in the disk management. This article will provide you with a detailed guide on how to do just that.

What is 2EFI?

2EFI is a bootloader that allows you to dual-boot two different operating systems on your computer. In this case, it is being used to boot both Pop OS and Mac OS on your virtual machine. However, if you want to remove Pop OS and use only Mac OS, you will need to get rid of the 2EFI files.

How to Remove 2EFI

To remove 2EFI, you will need to follow these steps:

1. Boot your virtual machine using a live USB of Pop OS.
2. Open a terminal window and type the following command to list all the partitions on your disk:

This will display a list of all the partitions on your disk. Look for the partition that contains the 2EFI files. It will typically be labeled as "EFI System Partition" or something similar.

2. Once you have identified the correct partition, you can mount it using the following command:

Replace "sdXY" with the actual device name of the partition. For example, if the partition is labeled as "/dev/sda1", you would use "/dev/sda1" in the command.

3. Next, you will need to delete the 2EFI files. To do this, navigate to the EFI directory on the mounted partition using the following command:

Once you are in the EFI directory, you can delete the 2EFI files using the following command:

This will delete the 2EFI directory and all of the files inside it.

4. Finally, you will need to unmount the partition using the following command:

References

• Pop OS Documentation: https://pop.system76.com/docs/uefi-bios/
• Hackintosh Documentation: https://dortania.github.io/OpenCore-Install-Guide/
• Arch Linux Wiki: https://wiki.archlinux.org/title/EFI_system_partition

Note: The above references are provided for informational purposes only and should not be considered as an endorsement of any particular product or service.

This article is for informational purposes only and should not be considered as a substitute for professional advice. The author and publisher are not responsible for any errors or omissions, or for any damages resulting from the use of the information contained herein.