Resolving Follow Error 0xc0000001 when Booting External SD Card on Windows 10 System
If you're experiencing Follow Error 0xc0000001 when trying to boot your Windows 10 system from an external SD card, you're not alone. This error can be frustrating, but it's usually easy to resolve. In this article, we'll cover the key concepts and provide a detailed guide to help you troubleshoot and fix this issue.
Understanding Follow Error 0xc0000001
Follow Error 0xc0000001 is a common issue that occurs when your system can't read the boot configuration data (BCD) stored on your external SD card. This can happen for a variety of reasons, such as a corrupt BCD, incorrect partition alignment, or missing system files.
Checking Your System Configuration
Before you start troubleshooting the error, it's important to make sure your system is configured correctly. Here are the steps to check your system configuration:
- Check that your external SD card is properly connected to your Windows 10 system.
- Make sure your system is set to boot from the external SD card. You can do this by going to the BIOS settings and setting the boot order.
- Check that the external SD card is formatted correctly and has the necessary system files. You can do this by using the
bcdbootcommand in the Windows recovery environment.
Resolving Follow Error 0xc0000001
If you've checked your system configuration and the error still persists, you can try the following steps to resolve the issue:
- Boot your Windows 10 system using the installation disk. This will allow you to access the Windows recovery environment.
- In the Windows recovery environment, open the command prompt and run the
bootrec /rebuildbcdcommand. This will scan your system for installed Windows installations and add them to the BCD store. - If the previous step doesn't resolve the issue, you can try repairing the BCD store by running the
bootrec /repairbcdcommand. This will repair any corrupt entries in the BCD store. - If the previous steps still don't resolve the issue, you can try using the
bcdbootcommand to rebuild the BCD store. This command will copy the necessary system files to the external SD card and create a new BCD store.
Follow Error 0xc0000001 when booting an external SD card on a Windows 10 system can be caused by a variety of issues, such as a corrupt BCD or missing system files. By following the steps outlined in this article, you should be able to troubleshoot and resolve the issue. If you're still having trouble, you may want to consider consulting the Microsoft support forums or reaching out to a professional for further assistance.