Troubleshooting Error 0xc0000001 when Booting External SD Card Windows 10 System
When trying to boot a Windows 10 system installed on an external SD card, some users may encounter Error 0xc0000001. This error can prevent the system from booting up and may require some troubleshooting. In this article, we will discuss the possible causes and solutions for this error.
What is Error 0xc0000001?
Error 0xc0000001 is a boot error that occurs when the system is unable to read the necessary files to boot up. This error is often caused by a corrupt boot configuration data (BCD) or issues with the boot sector of the hard drive or SD card. In the case of an external SD card, this error may be caused by incorrect partitioning or formatting of the SD card, or by issues with the UEFI boot settings.
How to Troubleshoot Error 0xc0000001 when Booting External SD Card Windows 10 System
To troubleshoot Error 0xc0000001 when booting an external SD card Windows 10 system, follow these steps:
Check the partition style of the SD card: Make sure that the partition style of the SD card is set to GPT (GUID Partition Table) instead of MBR (Master Boot Record). The GPT partition style is required for UEFI boot.
Check the file system of the SD card: Make sure that the file system of the SD card is set to NTFS. The NTFS file system is required for Windows 10.
Repair the BCD: Use the
bootrec /rebuildbcdcommand in the Windows Recovery Environment (WinRE) to repair the BCD.Reset the UEFI boot settings: Reset the UEFI boot settings to the default settings and try booting the system again.
Error 0xc0000001 when booting an external SD card Windows 10 system can be caused by a variety of issues, including incorrect partitioning or formatting of the SD card, corrupt BCD, or issues with the UEFI boot settings. By following the steps outlined in this article, you can troubleshoot and resolve this error and successfully boot your Windows 10 system from an external SD card.