LSI LSI9266-8 Icard Failure to Enter BIOS Configuration Utility

LSI9266-8I Card: Failure to Enter BIOS Configuration Utility

The LSI9266-8I is a popular host bus adapter (HBA) used for connecting storage devices to servers. However, some users have reported issues with entering the BIOS configuration utility during system boot. This article aims to provide a detailed explanation of the issue, possible causes, and solutions.

Understanding the LSI9266-8I Card

The LSI9266-8I is a 6Gb/s SAS HBA that supports up to eight internal SAS or SATA devices. It is commonly used in servers and storage arrays for high-performance data transfer. The card features a BIOS configuration utility that allows users to configure various settings, such as SAS address assignments and device hot-plugging.

Failure to Enter BIOS Configuration Utility

Users may encounter issues when attempting to enter the BIOS configuration utility during system boot. The most common symptom is the system booting directly to the operating system without displaying the BIOS configuration utility screen.

Possible Causes

There are several possible causes for this issue, including:

• The BIOS configuration utility may have been disabled or corrupted.
• The system may be booting from a different device, such as a USB drive or network boot server.
• The boot order in the BIOS settings may have been changed, causing the system to bypass the LSI9266-8I card during boot.
• The LSI9266-8I card may be faulty or incompatible with the system.

Solutions

To resolve the issue, users can try the following solutions:

1. Restore the BIOS configuration utility:
   1. Restart the system and press the key to enter the BIOS setup (usually F2, F10, or DEL).
   2. Navigate to the BIOS configuration utility and ensure that it is enabled.
   3. Save and exit the BIOS setup.
2. Check the boot order:
   1. Restart the system and press the key to enter the BIOS setup.
   2. Navigate to the boot order settings and ensure that the LSI9266-8I card is listed as the primary boot device.
   3. Save and exit the BIOS setup.
3. Check for compatibility issues:
   1. Check the LSI9266-8I card's documentation to ensure that it is compatible with the system.
   2. If necessary, replace the LSI9266-8I card with a compatible model.
4. Check for hardware faults:
   1. Check the LSI9266-8I card's LED indicators to ensure that it is receiving power and functioning properly.
   2. If necessary, replace the LSI9266-8I card with a known-good unit.

References

• LSI Corporation. (2012). LSI9266-8I 6Gb/s SAS Host Bus Adapter Product Guide.
• LSI Corporation. (2013). LSI9266-8I 6Gb/s SAS Host Bus Adapter User Guide.

Note: The above references are for informational purposes only and may not be the most up-to-date versions available. Users are advised to consult the manufacturer's website for the most recent documentation.