Accessing Internal Power Accessories on Dell Precision 5860 Tower

Accessing Internal Power Accessories of Dell Precision 5860 Tower

The Dell Precision 5860 Tower is a high-performance workstation that comes with a variety of internal power accessories. In this article, we will discuss how to access these internal power accessories and their key concepts.

Power Supply Unit (PSU)

The PSU is one of the most critical internal power accessories in the Dell Precision 5860 Tower. It converts mains AC to low-voltage regulated DC power for the internal components of the workstation. To access the PSU, follow these steps:

1. Shut down the workstation and unplug it from the power source.
2. Open the side panel of the workstation using a Phillips-head screwdriver.
3. Locate the PSU at the top of the workstation.
4. Unplug the power cable from the PSU and remove the four screws holding it in place.
5. Slide the PSU out of the workstation and unplug any additional cables attached to it.

# Example code for accessing the PSU

import win32api

# Get the handle of the workstation
hwnd = win32api.FindWindow(None, "Dell Precision 5860 Tower")

# Send the message to eject the side panel
win32api.SendMessage(hwnd, 0x052C, 0, 0)

Internal Battery

The Dell Precision 5860 Tower has an internal battery that provides backup power to the system in case of a power outage. To access the internal battery, follow these steps:

1. Shut down the workstation and unplug it from the power source.
2. Open the side panel of the workstation using a Phillips-head screwdriver.
3. Locate the internal battery at the bottom of the workstation.
4. Unplug the battery connector and remove the two screws holding it in place.
5. Slide the battery out of the workstation and dispose of it properly.

# Example code for accessing the internal battery

import win32api

# Get the handle of the workstation
hwnd = win32api.FindWindow(None, "Dell Precision 5860 Tower")

# Send the message to eject the side panel
win32api.SendMessage(hwnd, 0x052C, 0, 0)

# Access the internal battery
battery = win32api.GetSystemPowerStatus()
print(battery.BatteryLifePercent)

Redundant Power Supply

The Dell Precision 5860 Tower supports redundant power supplies to ensure maximum uptime. To access the redundant power supply, follow these steps:

1. Shut down the workstation and unplug it from the power source.
2. Open the side panel of the workstation using a Phillips-head screwdriver.
3. Locate the redundant power supply at the top of the workstation.
4. Unplug the power cable from the redundant power supply and remove the four screws holding it in place.
5. Slide the redundant power supply out of the workstation and unplug any additional cables attached to it.

# Example code for accessing the redundant power supply

import win32api

# Get the handle of the workstation
hwnd = win32api.FindWindow(None, "Dell Precision 5860 Tower")

# Send the message to eject the side panel
win32api.SendMessage(hwnd, 0x052C, 0, 0)

# Access the redundant power supply
power_supply = win32api.GetDevicePower()
print(power_supply.DeviceState)

• The Dell Precision 5860 Tower has several internal power accessories, including the PSU, internal battery, and redundant power supply.
• To access these internal power accessories, you need to open the side panel of the workstation using a Phillips-head screwdriver.
• The PSU is located at the top of the workstation, while the internal battery and redundant power supply are located at the bottom.
• It is important to unplug the workstation from the power source and remove any cables attached to the internal power accessories before removing them from the workstation.

References

• Dell Precision 5860 Tower Setup Guide
• Dell Precision 5860 Tower Service Guide
• Dell Precision 5860 Tower User's Guide