D-Link DWR-M960 Wireless Upgrade Not Working: Solution
Are you experiencing issues with upgrading the firmware on your D-Link DWR-M960 router? This article will provide you with a detailed guide on how to resolve this problem, specifically when the wireless upgrade stops working, there is lag power lock in the UAE, the emergency notification is not working, and the current firmware version is 1.1.49.
1. Upgrade Using Wired Connection
If the wireless upgrade is not working, you can try upgrading the firmware using a wired connection. Here are the steps to follow:
- Download the latest firmware version for your D-Link DWR-M960 router from the official D-Link website.
- Connect your computer to the router using an Ethernet cable.
- Log in to the router's web interface.
- Go to the "Firmware Upgrade" section.
- Select the firmware file you downloaded in step 1.
- Click "Upgrade" to start the upgrade process.
2. Power Cycle the Router
If the power lock issue persists, you can try power cycling the router. Here are the steps to follow:
- Unplug the power cord from the router.
- Wait for 30 seconds.
- Plug the power cord back into the router.
- Wait for the router to fully boot up.
3. Check the Country Settings
If you are in the UAE and experiencing issues with the wireless upgrade, you may need to check the country settings on your router. Here are the steps to follow:
- Log in to the router's web interface.
- Go to the "Wireless" section.
- Check the country settings and make sure it is set to the correct country.
4. Reset the Router
If none of the above solutions work, you may need to reset the router to its factory settings. Here are the steps to follow:
- Locate the reset button on the back of the router.
- Use a paperclip or a similar object to press and hold the reset button for 30 seconds.
- Release the reset button and wait for the router to reboot.
- Log in to the router's web interface and configure the settings again.
In this article, we have covered the following solutions to resolve the D-Link DWR-M960 wireless upgrade not working issue:
- Upgrade using a wired connection
- Power cycle the router
- Check the country settings
- Reset the router