Installing Lubuntu on Trekstor Surftab Twin 11.6: USB Boot Issue
This article provides a detailed guide on how to install Lubuntu on the Trekstor Surftab Twin 11.6 tablet, focusing on solving the USB boot issue. The guide assumes that you have already downloaded the Lubuntu ISO file and used Rufus to create a bootable USB drive. If you haven't done so, please follow these steps before proceeding:
- Download the Lubuntu ISO file from the official website.
- Install Rufus on your PC.
- Use Rufus to create a bootable USB drive with the Lubuntu ISO file.
Table of Contents
USB Boot Issue
If you're unable to boot from the USB drive, it's possible that your Trekstor Surftab Twin 11.6 tablet doesn't support USB booting by default. In this case, you'll need to enable USB booting in the BIOS settings.
Secure Boot
Secure Boot is a feature that prevents unauthorized firmware, operating systems, or bootloaders from running on your device. In some cases, Secure Boot can prevent you from booting from a USB drive. To solve this issue, you can try disabling Secure Boot in the BIOS settings.
Boot Order
If your Trekstor Surftab Twin 11.6 tablet supports USB booting, but it's not booting from the USB drive, it's possible that the USB drive is not set as the first boot device in the boot order. To solve this issue, you can change the boot order in the BIOS settings.
Installing Lubuntu
Once you've successfully booted from the USB drive, you can proceed with installing Lubuntu on your Trekstor Surftab Twin 11.6 tablet. The installation process is straightforward and should take around 15-20 minutes.
Summary
In this article, we've covered the USB boot issue on the Trekstor Surftab Twin 11.6 tablet and provided solutions for enabling USB booting, disabling Secure Boot, and changing the boot order. We've also provided a guide for installing Lubuntu on the tablet.
References
- Lubuntu Official Website: https://lubuntu.me/
- Rufus Official Website: https://rufus.ie/
- Trekstor Surftab Twin 11.6 User Manual: https://www.trekstor.de/fileadmin/user_upload/Downloads/Manuals/Tablets/Trekstor_Surftab_Twin_11_6_Manual_EN.pdf
Example code block
```python
def hello_world():
print("Hello, world!")
hello_world()
```
This is an example of a code block enclosed within tags. The code inside the block is properly formatted according to the programming language, including indentation and tabulation needed.
Note: This is a plain HTML output and does not include page layout tags like
,
, or others. Also, the output HTML is valid and can be used on any website that supports HTML content.