RAID-1 is a popular data storage configuration that provides redundancy and data protection. In this article, we will explore how to configure RAID-1 on a Synology 723+ NAS with Seagate Exos X20 | 20 TB drives and discuss whether this setup will work effectively.
Before we dive into the configuration process, let's understand what RAID-1 is and why it is a good choice for data protection.
What is RAID-1?
RAID stands for Redundant Array of Independent Disks, and RAID-1 is one of the most basic and commonly used RAID levels. In RAID-1, data is mirrored across two or more drives, providing redundancy and fault tolerance.
When you configure RAID-1, all the data written to one drive is automatically duplicated to the other drive(s) in real-time. This ensures that if one drive fails, your data remains safe and accessible from the remaining drive(s).
Configuring RAID-1 on Synology 723+ NAS
The Synology 723+ NAS is a powerful network-attached storage device that supports various RAID configurations, including RAID-1. Here's how you can configure RAID-1 on your Synology 723+ NAS:
- Start by connecting your Seagate Exos X20 | 20 TB drives to the NAS. Ensure that the drives are properly inserted and securely connected.
- Power on your Synology 723+ NAS and wait for it to boot up.
- Access the Synology DiskStation Manager (DSM) web interface by entering the NAS's IP address in your web browser.
- Log in to the DSM using your administrator credentials.
- Once logged in, click on the "Storage Manager" icon on the DSM desktop.
- In the Storage Manager, click on "Storage Pool" in the left sidebar.
- Click on the "Create" button to create a new storage pool.
- Follow the on-screen instructions to select the Seagate Exos X20 | 20 TB drives and configure the RAID type as "RAID-1".
- Choose a suitable name for your storage pool and click "Next".
- Review the summary and click "Apply" to create the RAID-1 storage pool.
- Wait for the process to complete. It may take some time depending on the size of your drives.
- Once the RAID-1 storage pool is created, you can create shared folders and start storing your data.
Congratulations! You have successfully configured RAID-1 on your Synology 723+ NAS with Seagate Exos X20 | 20 TB drives. Your data is now protected and redundant.
Will It Work?
Now, let's address the question of whether this setup will work effectively. The Synology 723+ NAS is compatible with a wide range of hard drives, including the Seagate Exos X20 | 20 TB drives. Therefore, there should be no compatibility issues in setting up RAID-1 with these drives.
However, it is important to note that RAID-1 provides redundancy and fault tolerance, but it is not a substitute for regular backups. While RAID-1 protects against drive failures, it does not protect against data loss due to other factors such as accidental deletion, file corruption, or hardware failure.
Therefore, it is always recommended to maintain regular backups of your important data, preferably on a separate storage device or in the cloud.
Configuring RAID-1 on a Synology 723+ NAS with Seagate Exos X20 | 20 TB drives is a straightforward process that provides redundancy and data protection. By following the steps outlined in this article, you can easily set up RAID-1 and ensure the safety of your data.
Remember to always keep regular backups of your important data to protect against other types of data loss. RAID-1 is a great starting point, but it should be complemented with a robust backup strategy.
| References |
|---|
| [1] Synology: https://www.synology.com/ |
| [2] Seagate: https://www.seagate.com/ |