How to Share Rooted Android Ethernet Connection to Another Ethernet Only Device

Are you looking to share your rooted Android device's Ethernet connection with another Ethernet-only device? This can be useful if you want to connect devices like gaming consoles, smart TVs, or other devices that don't have built-in Wi-Fi capabilities. In this article, we will guide you through the process of sharing your rooted Android Ethernet connection to another Ethernet-only device.

Requirements:

Before we begin, let's make sure you have all the necessary requirements:

• A rooted Android device
• An Ethernet cable
• An Ethernet-only device (e.g., gaming console, smart TV, etc.)
• A USB Ethernet adapter (if your Android device doesn't have an Ethernet port)

Step 1: Connect your Android device to the internet via Ethernet

The first step is to ensure that your Android device is connected to the internet via Ethernet. Here's how:

1. Connect one end of the Ethernet cable to your Android device's Ethernet port or USB Ethernet adapter (if applicable).
2. Connect the other end of the Ethernet cable to your internet source (e.g., router, modem, etc.).

Step 2: Enable USB tethering on your Android device

Next, we need to enable USB tethering on your Android device to share the internet connection. Follow these steps:

1. Go to the Settings app on your Android device.
2. Scroll down and tap on "Network & internet" or "Connections".
3. Select "Tethering & portable hotspot".
4. Toggle on the "USB tethering" option.

Step 3: Connect your Android device to the Ethernet-only device

Now, let's connect your Android device to the Ethernet-only device using an Ethernet cable:

1. Connect one end of the Ethernet cable to your Android device's Ethernet port or USB Ethernet adapter.
2. Connect the other end of the Ethernet cable to the Ethernet port of your Ethernet-only device.

Step 4: Configure network settings on the Ethernet-only device

Finally, we need to configure the network settings on the Ethernet-only device to use the shared internet connection. The steps may vary depending on the device, but here's a general guide:

1. Access the network settings on your Ethernet-only device. This can usually be found in the device's settings menu.
2. Look for the network or internet settings and select "Wired" or "Ethernet".
3. Choose the option to configure the network manually or enter the network settings manually.
4. Enter the following details:
   • IP address: Set it to a unique IP address within the same range as your Android device. For example, if your Android device's IP address is 192.168.1.1, you can set the Ethernet-only device's IP address to 192.168.1.2.
   • Subnet mask: This should be the same as your Android device's subnet mask. It is usually 255.255.255.0.
   • Gateway: Enter the IP address of your Android device. In our example, it would be 192.168.1.1.
   • DNS servers: You can use the same DNS servers as your Android device or use the DNS servers provided by your internet service provider.
5. Save the network settings and exit the settings menu.

That's it! You have successfully shared your rooted Android Ethernet connection to another Ethernet-only device. Now, your Ethernet-only device should be able to access the internet through your Android device's connection.

Remember, this method requires your Android device to be rooted. Rooting your device may void its warranty and could potentially cause security risks if not done properly. Proceed with caution and make sure to follow reliable rooting guides specific to your device.

References: