Configuring Shadowsocks + v2ray Server on Local Computer at Home

Shadowsocks and v2ray are both proxy servers that can help you bypass internet censorship and protect your online privacy. In this guide, we will walk you through the process of setting up a Shadowsocks + v2ray server on your local computer at home. This will allow you to access blocked websites and services securely from anywhere in the world.

Step 1: Download and Install Shadowsocks

To get started, you need to download and install the Shadowsocks server software on your local computer. Follow these steps:

Go to the Shadowsocks website and download the server software appropriate for your operating system (Windows, macOS, or Linux).
Once the download is complete, run the installation file and follow the on-screen instructions to install Shadowsocks on your computer.

Step 2: Configure Shadowsocks Server

After installing Shadowsocks, you need to configure the server settings. Here's how:

Launch the Shadowsocks server software.
Click on the "Server" tab.
Enter a server IP address and port number of your choice. Note that the IP address should be the local IP address of your computer.
Choose a password for your server. Make sure it's strong and secure.
Select an encryption method from the dropdown menu. AES-256-CFB is recommended for its strong encryption.
Click the "Save" button to save your server configuration.

Step 3: Download and Install v2ray

Now, let's proceed to install v2ray, which will work alongside Shadowsocks:

Go to the v2ray website and download the v2ray software for your operating system.
Once the download is complete, run the installation file and follow the on-screen instructions to install v2ray on your computer.

Step 4: Configure v2ray Server

After installing v2ray, you need to configure the server settings. Here's how:

Launch the v2ray server software.
Click on the "Config" tab.
Copy the following code and paste it into the configuration file:


    {
      "inbounds": [
        {
          "port": 1080,
          "protocol": "socks",
          "settings": {
            "auth": "noauth",
            "udp": true
          }
        }
      ],
      "outbounds": [
        {
          "protocol": "shadowsocks",
          "settings": {
            "servers": [
              {
                "address": "127.0.0.1",
                "port": 1081,
                "method": "aes-256-cfb",
                "password": "your_password",
                "udp": true
              }
            ]
          }
        }
      ]
    }

Make sure to replace "your_password" with the password you set for your Shadowsocks server in Step 2.

Click the "Save" button to save your v2ray server configuration.

Step 5: Start the Servers

Now that you have configured both Shadowsocks and v2ray servers, it's time to start them:

Launch the Shadowsocks server software.
Click on the "Start" button to start the Shadowsocks server.
Launch the v2ray server software.
Click on the "Start" button to start the v2ray server.

Congratulations! You have successfully set up a Shadowsocks + v2ray server on your local computer at home. You can now configure your devices or applications to connect to this server and enjoy secure and unrestricted internet access.

Conclusion

In this guide, we have shown you how to configure a Shadowsocks + v2ray server on your local computer at home. By following these steps, you can bypass internet censorship and protect your online privacy. Remember to use this server responsibly and respect the laws and regulations of your country.

References

Website	Description
Shadowsocks	Official website to download Shadowsocks server software
v2ray	Official website to download v2ray software

Configuring Shadowsocks + v2ray Server on Local Computer at Home