The Mac Mini 2018 is a powerful and compact computer that runs on the macOS operating system. However, if you prefer to use Linux on your Mac Mini, you may encounter some challenges, such as the "Auto Startup After Power Failure" feature. In this article, we will guide you on how to enable this feature on your Mac Mini 2018 running Linux.
Understanding Auto Startup After Power Failure
The Auto Startup After Power Failure feature allows your Mac Mini to automatically turn on after a power outage or unexpected shutdown. This feature is particularly useful for servers or systems that need to be up and running continuously.
By default, this feature is disabled on the Mac Mini 2018 when running Linux. However, with a few steps, you can enable it and ensure that your Mac Mini automatically starts up after a power failure.
Enabling Auto Startup After Power Failure
To enable the Auto Startup After Power Failure feature on your Mac Mini 2018 running Linux, follow the steps below:
- Open a terminal window on your Mac Mini.
- Enter the following command to install the necessary utility:
sudo apt-get install nvram-wakeup
- Once the installation is complete, reboot your Mac Mini.
- After the reboot, open a terminal window again.
- Enter the following command to set up the Auto Startup After Power Failure feature:
sudo nvram-wakeup
This command will prompt you to enter your password. After entering your password, you will see a list of options to configure.
Use the arrow keys to navigate through the options and press Enter to select an option. Look for the option that enables Auto Startup After Power Failure. The exact name of the option may vary depending on your Linux distribution.
Once you have selected the option, follow the prompts to set the desired time delay for the auto startup. This delay allows the system to stabilize before automatically starting up.
After configuring the time delay, save the changes and exit the utility.
That's it! You have successfully enabled the Auto Startup After Power Failure feature on your Mac Mini 2018 running Linux.
Conclusion
The Mac Mini 2018 is a versatile machine that can run Linux, but it may require some additional configuration to enable certain features. By following the steps outlined in this article, you can enable the Auto Startup After Power Failure feature on your Mac Mini 2018 running Linux. This will ensure that your system automatically starts up after a power failure, providing uninterrupted service.
References
| Number | Source |
|---|---|
| 1 | https://www.apple.com/mac-mini/ |
| 2 | https://www.nvram-wakeup.de/ |