Asus UX51VZA Black Screen of Death: No BIOS Post After Settings Edit

Asus UX51VZA Black Screen of Death: No BIOS Post After Settings Edit

If you are an Asus UX51VZA user and have encountered the dreaded Black Screen of Death (BSOD) after making changes to your system settings, you are not alone. This issue can be quite frustrating, but there are a few steps you can take to try and resolve it.

1. Check the Power Supply

The first thing you should do is check if your laptop is receiving power. Make sure the power adapter is properly connected to both your laptop and a working power outlet. Look for any signs of damage on the power cable or adapter. If everything seems fine, try using a different power adapter to rule out any issues with the current one.

2. Perform a Hard Reset

A hard reset can help resolve many hardware-related issues. To perform a hard reset on your Asus UX51VZA, follow these steps:

1. Disconnect the power adapter and remove the battery from your laptop.
2. Press and hold the power button for at least 15 seconds.
3. Reinsert the battery and reconnect the power adapter.
4. Try turning on your laptop to see if the black screen issue is resolved.

3. Reset BIOS Settings

If the black screen issue persists, it is possible that the changes you made to your system settings have caused a conflict with the BIOS. To reset the BIOS settings, follow these steps:

1. Turn off your laptop and disconnect the power adapter.
2. Locate the CMOS battery on your motherboard. It is a small round battery usually placed near the center.
3. Remove the CMOS battery carefully.
4. Wait for a few minutes and then reinsert the CMOS battery.
5. Reconnect the power adapter and turn on your laptop.

This will reset the BIOS settings to their default values and may help resolve the black screen issue.

4. Connect to an External Display

If you are still experiencing the black screen issue, try connecting your Asus UX51VZA to an external display. This will help determine if the problem lies with the laptop's display or with the internal components. Follow these steps:

1. Connect your laptop to an external display using an HDMI or VGA cable.
2. Turn on your laptop and the external display.
3. Press the appropriate key combination (usually Fn + F4 or F5) to switch the display output to the external monitor.

If the external display works fine, it suggests that the issue is with your laptop's display. In this case, you may need to contact Asus support for further assistance.

5. Seek Professional Help

If none of the above steps resolve the black screen issue on your Asus UX51VZA, it is recommended to seek professional help. Contact Asus support or take your laptop to an authorized service center for diagnosis and repair.

Remember to provide them with detailed information about the changes you made to the system settings before encountering the black screen issue. This will help the technicians diagnose the problem more accurately.

We hope these steps have helped you resolve the Asus UX51VZA Black Screen of Death issue. If you have any further questions or need additional assistance, feel free to reach out to us.

References:

Explore our wide range of articles on tech support to find solutions for various hardware and software issues.