How to flash a Hololens 1

How to Flash a Hololens 1

Flashing your Hololens 1 is a crucial step in troubleshooting and updating the device's software. This process allows you to reinstall the operating system, fix software issues, and ensure your Hololens is running smoothly. In this article, we will guide you through the steps to flash your Hololens 1.

Prerequisites

Before you begin, make sure you have the following:

• A PC running Windows 10 with the latest updates
• A USB cable to connect your Hololens 1 to the PC
• The latest version of the Hololens 1 recovery image from the official Microsoft website

Step 1: Prepare your PC

Start by ensuring your PC is ready for the flashing process:

1. Connect your PC to a stable internet connection.
2. Make sure your PC has enough free disk space to download and store the recovery image.
3. Disable any antivirus or firewall software temporarily, as they may interfere with the flashing process.

Step 2: Download the Hololens 1 Recovery Image

Next, you need to download the recovery image for your Hololens 1:

1. Visit the official Microsoft website and navigate to the Hololens 1 support page.
2. Find and download the latest version of the Hololens 1 recovery image.
3. Save the recovery image to a location on your PC where you can easily access it later.

Step 3: Connect your Hololens 1 to your PC

Now it's time to connect your Hololens 1 to your PC:

1. Using a USB cable, connect your Hololens 1 to your PC.
2. Wait for your PC to recognize the connected device.

Step 4: Run the Hololens 1 Recovery Tool

With your Hololens 1 connected to your PC, follow these steps:

1. Locate the downloaded recovery image on your PC and double-click it to open it.
2. Inside the recovery image folder, find and run the "FlashApp" application.
3. Follow the on-screen instructions provided by the Hololens 1 Recovery Tool.
4. Wait for the flashing process to complete. This may take some time, so be patient.

Step 5: Disconnect your Hololens 1

Once the flashing process is complete, you can disconnect your Hololens 1 from your PC:

1. Unplug the USB cable from your Hololens 1 and your PC.

Congratulations! You have successfully flashed your Hololens 1. Your device should now be running the latest software version and any software issues should be resolved.

References