TP-Link EAP670 AP and TL-SG1210MPE Switch: Guest network VLAN configuration

When setting up a guest network on your TP-Link EAP670 Access Point (AP) and TL-SG1210MPE Switch, it's important to configure VLANs correctly. VLANs, or Virtual Local Area Networks, allow you to separate your network into different segments, ensuring that your guest network remains isolated from your main network. In this article, we will guide you through the process of configuring VLANs for your TP-Link devices.

Step 1: Connect and Configure Your Devices

Before you begin, make sure your TP-Link EAP670 AP and TL-SG1210MPE Switch are properly connected. Connect the AP to the switch using an Ethernet cable, and connect the switch to your main network router. Power on both devices.

Step 2: Access the TP-Link Web Interface

To configure your devices, you need to access their web interfaces. Open a web browser on your computer and enter the default IP address of your AP (usually 192.168.0.254) into the address bar. Press Enter.

Step 3: Configure VLANs on the Switch

Once you've accessed the AP's web interface, navigate to the VLAN settings. Here, you will create a new VLAN for your guest network:

1. Click on the "Network" tab.
2. Click on "VLAN" in the left-hand menu.
3. Click on the "Add" button to create a new VLAN.
4. Enter a name for your VLAN, such as "Guest Network".
5. Assign a VLAN ID, such as 10, for your guest network.
6. Click "Save" to create the VLAN.

Step 4: Configure VLANs on the AP

Now that you've created a VLAN on the switch, you need to configure the AP to use that VLAN for the guest network:

1. Click on the "Wireless" tab in the AP's web interface.
2. Click on "SSID Settings" in the left-hand menu.
3. Click on the SSID you want to assign to the guest network.
4. Scroll down to the "VLAN" section.
5. Enable the "VLAN" option.
6. Select the VLAN ID you created for the guest network on the switch.
7. Click "Save" to apply the changes.

Step 5: Test Your Guest Network

With the VLANs configured, your guest network should now be isolated from your main network. Test the guest network by connecting a device to the AP's SSID assigned to the guest network. You should be able to access the internet without accessing any devices on your main network.

Congratulations! You have successfully configured VLANs for your TP-Link EAP670 AP and TL-SG1210MPE Switch to create a guest network. Remember, VLANs provide an added layer of security by keeping your guest network separate from your main network.

References