Using xfreerdp to Get a Console Session with Windows 10

Windows 10 is a popular operating system used by millions of people around the world. Sometimes, you may need to access a console session on your Windows 10 computer for troubleshooting or maintenance purposes. In this article, we will explore how to use xfreerdp to get a console session with Windows 10.

What is xfreerdp?

xfreerdp is an open-source Remote Desktop Protocol (RDP) client that allows you to connect to a remote Windows computer over a network. It provides a graphical interface to access the remote computer's desktop and applications.

Installing xfreerdp

To use xfreerdp on your computer, you need to install it first. Here are the steps to install xfreerdp:

1. Open a terminal or command prompt on your computer.
2. Run the following command to install xfreerdp:
   sudo apt-get install freerdp2-x11
3. Enter your password when prompted.
4. Wait for the installation to complete.

Connecting to Windows 10 with xfreerdp

Once you have xfreerdp installed, you can use it to connect to a Windows 10 computer. Follow these steps:

1. Open a terminal or command prompt on your computer.
2. Run the following command to start the RDP session:
   xfreerdp /u:USERNAME /p:PASSWORD /v:IP_ADDRESS
3. Replace USERNAME with your Windows 10 username.
4. Replace PASSWORD with your Windows 10 password.
5. Replace IP_ADDRESS with the IP address of your Windows 10 computer.
6. Press Enter to start the RDP session.

Note: Make sure you have the correct username, password, and IP address to connect to your Windows 10 computer.

Using xfreerdp in Console Mode

By default, xfreerdp opens in a windowed mode. However, if you want to access the console session of your Windows 10 computer, you can use the console mode. Follow these steps:

1. Open a terminal or command prompt on your computer.
2. Run the following command to start the RDP session in console mode:
   xfreerdp /u:USERNAME /p:PASSWORD /v:IP_ADDRESS /console
3. Replace USERNAME with your Windows 10 username.
4. Replace PASSWORD with your Windows 10 password.
5. Replace IP_ADDRESS with the IP address of your Windows 10 computer.
6. Press Enter to start the RDP session in console mode.

Now you should be connected to the console session of your Windows 10 computer using xfreerdp.

Conclusion

Using xfreerdp, you can easily connect to a console session on your Windows 10 computer. This can be helpful for troubleshooting or performing maintenance tasks. Make sure to install xfreerdp and use the correct credentials and IP address to establish a successful connection.